Modern, robust, featuring top performance and fully automated, the O'BOX box shaper provides very high-speed shaping of 2- to 20-liter boxes, with or without gluing on the inside. The O’BOX automatic box shaper operates in a continuous cycle: opening of the box, closing of the lower tabs, squaring and guided ejection of the shaped box that will hold the BIB.
Benefits
Ease of use: boxes can be loaded without stopping the machine, simplified operator dialog, change of format in less than 15 minutes, large-capacity box supply storage
High-quality work: ejection of the shaped box by motorized linear guides, squaring of the box during shaping, closing of inside tabs using brackets, rotating arms for full box opening
Versatility: supporting plates with suction pads and pre-positioning, adjustments to the mm by revolution counters, broad range of box format possibilities
The O’BOX boxer can be built into the FLEXI-LINE, TECHNIBAG’s complete packaging line.
TECHNIBAG also proposes a line of boxes to be used with the O’BOX shaper
Two models:
900 boxes/h
1900 boxes/h
Box storage capacity: 160 2-3 or 5 L boxes, 80 10 L boxes, 70 20 L boxes
Footprint: Height 2100 mm (min) x Width 1750 mm x Depth 2250 mm
Weight: 1500 kg
Air pressure: 7 to 10 bar
Voltage: 3x400V+N+T
Frequency: 50HZ / 60 HZ
Power: 3 KW
Air consumption: 30 m3/h / 7 bar
Materials meet the 2006/42/CE Machine Directive requirements
Compact chassis; box storage compartment without platform
Box reloading without stopping the machine
Rotating arm for total opening of box
Plates with suction pads for three box formats (others in option)
