SEMI-MANUAL FILLING MACHINE
BIB' UP SMART TOP 180
Filling machine for separate BIB and POUCH vacuum bags, in a range of formats
Compact and ergonomic, the BIB’UP SMART filling machine is ideal for small and medium production runs of 1.5 to 20-litre BIB and 1.5 to 3-litre POUCH vacuum bags.
The table-top BIB’ UP SMART TOP 180 is fully equipped as standard and comes with a wide range of options to suit your sector of activity. It can handle 180 to 290 3L BIB bags per hour*, at high temperature, in cold chain or at ambient temperature.
The Smart solution!!
*Depending on the characteristics of the product to be filled, whether gravity or pump fed, the options chosen and the machine operator’s working conditions.
Equipment complies with Machinery Directive 2006/42/CE. Conformity verified and validated by an independent body.
OPERATION AND DEGREE OF AUTOMATION
Complete filling cycle with manual and automated stages:
• Manual operations:
insertion of empty bag then, using an ergonomic lever arm: removal of tap, insertion of filling head into neck, launch of filling cycle
• Automated operations:
vacuum created in bag, filling and counting to programmed volume, nitrogen injection (if programmed)
• Final manual operations:
using ergonomic lever arm, repositioning of filling head, refitting and insertion of tap
Manual ejection of full bag
TEMPERATURE CONTROL
• For use in cleaning, priming and filling modes
• Controlled from the filling machine display
• Two setpoints: minimum and maximum, with programmable production halt management
• Configurable data recording and transfer on demand
FASTER FILLING RATES
• Depending on your production needs, the BIB’UP SMART is designed to control an external pump
• STOP & GO operation for each filling cycle, managed by the filling machine’s PLC
• Secure connection via servo connector
MORE info
SPEEDS
BIB/hour | | BY GRAVITY/PUMP AL30/PUMP AL40 |
|---|---|
| 3 L | 180 / 280 / 290 |
| 5 L | 140 / 250 / 260 |
| 10 L | 90 / 200 / 210 |
| 15 L | 60 /160 / 175 |
| 20 L | 50 / 140 / 150 |
POUCH/hour | |
|---|---|
| | BY GRAVITY/PUMP AL30/PUMP AL40 |
| 1.5 L | 170 / 260 / 270 |
| 3 L | 110 / 240 / 250 |
According to manufacturer’s data
TECHNICAL CHARACTERISTICS
- Electricity supply: 230 VAC 50 Hz 1P+N+E
- Compressed air pressure required: 6 bar
- Nitrogen pressure required: 0,5 bar
- Liquid infeed connection: to be defined (40 DIN as standard)
- Dimensions: Depth: 900 mm / Height: 800 mm / Width: 640 mm
- Weight: 30 kg (without options)
STANDARD CONFIGURATION - STANDARD EQUIPMENT
- Work surface: 304 stainless steel, tilt adjustable
- 316 stainless steel liquid circuit for continuous use up to 90°C
- No pump, 40 DIN connection
- 316 stainless steel filling head with integral closure and screw-on nozzle, integrated vacuum and nitrogen-injection circuits
- Programmable and automated CIP circuit
- Immobiliser
- Automatic locking of arm in filling position
- Paddle-wheel flowmeter with 316 stainless steel body
- Monochrome display, programme loaded via micro USB cable. A configurable recipe for each filling volume, up to 6 recipes
- T1 mechanical clamp for Vitop or equivalent taps, high-neck
- Options: please consult us
